Add 5 ounces of chocolate to a medium bowl and microwave for 30 seconds, remove and stir, then continue to microwave at 15-second intervals, stirring fully and scraping the sides of the bowl with a rubber spatula between each one, until almost completely melted. Continue to stir so that the heat of the chocolate melts the unmelted pieces. If after melting and trying to stir in any remaining chocolate they just don’t want to melt, microwave for an additional 5 seconds.Check the temperature to make sure that the chocolate reads between 88 and 90 degrees F. If it goes over 90 degrees, stir in an additional ounce of chocolate until melted to bring it back down to 88 to 90 degrees F. If you are using two molds, you can do 10 ounces then add in 2 ounces, if needed. You don’t want that chocolate to sit too long and have to be reheated again if you only have one mold.
Spoon about 1 tablespoon of melted chocolate into each mold and use the back of the spoon to spread it around, make sure to get all the way to the top of the rim and not leave any exposed areas. Place the mold on the small baking sheet and refrigerate for 5 minutes.
Remove from the refrigerator and spoon another heaping spoonful into the molds one at a time (do not add chocolate to each cavity at once because it will start to cool too quickly and become thick, gritty, and hard to work with). Use the back of the spoon to work the second layer of chocolate around making sure to build up the edges around the rim, you want a thicker edge to ensure they don’t crack. Freeze for 10 minutes.
Remove from the freezer and put on the food-safe gloves and remove the chocolate shells from the molds. Repeat steps 1 - 4 if using a single mold.
Once all of your shells are made, microwave a flat plate in the microwave for 2 minutes, then place 6 of the 12 halves on the plate one at a time using a gloved hand to gently spin them to smooth the edges then place round side down in a regular-sized cupcake liner on your work surface. Wipe the plate off.
Fill the cavities with a packet of hot cocoa mix, 1 Andes candy, and marshmallows.
Reheat the plate for 2 minutes in the microwave. Then repeat the process with the other 6 halves and place them on top of the cocoa-filled halves and gently press to seal.
Let the hot chocolate bombs set for a few minutes then top with a drizzle of chocolate and sprinkles if desired.
To make hot chocolate: Heat 8 ounces of milk in a small saucepan over medium heat just until the edges begin to bubble. Then pour the warm milk over a hot chocolate bomb in a large mug and stir until fully mixed.
Notes
Nutrition includes 1 hot chocolate bomb + 8 ounces of whole milk.
You can substitute other finely chopped high-quality chocolate such as Ghirardelli baking chocolate. You want to use a chocolate that’s between 55% and 80% cocoa for this recipe and it needs to have cocoa butter as one of the first ingredients. (See our basic hot chocolate bombs recipe for more information about different types of chocolate you can use and to get all my tips and tricks.)